- Главная страница
- Медиа-центр
- Пресс-релизы
- Комитет по стратегическому планированию НЛМК утвердил основные параметры 3-го этапа Программы технического перевооружения
24 апреля 2008
Комитет по стратегическому планированию НЛМК утвердил основные параметры 3-го этапа Программы технического перевооружения
Комитет по стратегическому планированию НЛМК утвердил основные параметры Программы технического перевооружения на период до 2015 года.
В настоящее время НЛМК реализует 2-й этап Программы технического перевооружения, который планируется завершить в 2011 году. В результате в 2011 году производство стали на российских площадках группы увеличится до 16,3 млн тонн1, производство листового проката на основной площадке НЛМК возрастет до 5,5 млн тонн, производство сортового проката на мощностях Макси-Групп возрастет до 4,0 млн тонн. Объем инвестиций в реализацию 2-го этапа программы составит более 4,4 млрд. долларов в производственный комплекс НЛМК, включая дочерние компании, и около 1,8 млрд. долларов в развитие активов Макси-Групп.
Утвержденный решением Комитета по стратегическому планированию 3-й этап Программы технического перевооружения включает инвестиции на 2009-2015 гг. и определяет производственную стратегию Группы НЛМК до 2015 года. Новый этап Программы предусматривает рост производства стали НЛМК в России до 22 млн тонн, листового проката – до 6,9 млн тонн, сортового и трубного проката – до 5,9 млн тонн. Объем инвестиций в реализацию 3-го этапа Программы на производственной площадке НЛМК ожидается на уровне 4,1 млрд. долларов и около 2,0 млрд. долларов в развитие активов Макси-Групп.
Кроме того, Программой предусмотрено производство стали в объеме 3,1 млн тонн и производство листового проката в объеме 6,4 млн тонн на зарубежных площадках НЛМК.
Третий этап Программы технического перевооружения НЛМК предусматривает:
1. Увеличение объемов выплавки стали на российских площадках НЛМК до 22 млн тонн.
Выпуск стали в конвертерных цехах на площадке в Липецке составит 14,5 млн тонн до 2015 г.
Выпуск стали в электросталеплавильных цехах на площадке в Липецке составит 1,5 млн тонн до 2015 г. Для этого планируется сооружение на Новолипецком металлургическом комбинате литейно-прокатного комплекса, состоящего из электросталеплавильного цеха, линии разливки тонких слябов и стана горячей прокатки.
Выпуск стали в электросталеплавильных цехах на площадках Макси-Групп составит около 6,0 млн тонн в 2015 г.
2. Увеличение выпуска листового проката на российских площадках НЛМК до 6,9 млн тонн.
Выпуск горячекатаного проката на площадке в Липецке в 2012 году составит 6,9 млн тонн, в т.ч. 1,3 млн тонн на литейно-прокатном комплексе
Выпуск холоднокатаного проката и проката с покрытиями на площадке в Липецке возрастет до 4,2 млн тонн в год за счет строительства станов холодной прокатки, сооружения агрегатов непрерывного горячего оцинкования и ввода в действие агрегата полимерных покрытий.
Кроме того, до конца 2008 года НЛМК планирует принять решение о строительстве Тольяттинского электрометаллургического завода мощностью до 2 млн тонн листового горячекатаного проката в год.
3. Увеличение выпуска сортового и трубного проката на площадках Макси-Групп до 5,9 млн тонн.
Выпуск 1,4 млн тонн высокопрочной арматуры и катанки на производственной площадке в г. Нижние Серьги в 2008 году.
Ввод в эксплуатацию мощностей по производству 1,0 млн тонн катанки и арматуры на производственной площадке в г. Березовский в середине 2008 года.
Начало строительства в 2008 году первой очереди Калужского электрометаллургического завода с выходом на объем производства 1,2 млн тонн арматуры и фасонного профиля к 2011 году и до 2,0 млн тонн сортового проката к 2015 году.
До конца 2008 года НЛМК планирует принять решение о строительстве электросталеплавильного цеха и мощностей по производству бесшовных труб до 1,0-1,5 млн тонн в Сибирском регионе.
Кроме того, до конца 2008 года НЛМК планирует принять решение о строительстве Воронежского электрометаллургического завода мощностью до 2 млн тонн сортового проката в год.
4. Программа развития производства электротехнической стали
Общий объем производства трансформаторной стали на площадках НЛМК планируется на уровне не менее 400 тыс. тонн к 2015 г. При этом доля высокопроницаемой трансформаторной стали (ВПС) составит более 70%.
5. Программа обеспечения производства стали основными видами сырья
Сегодня НЛМК обеспечивает собственные потребности в железорудном сырье на 90%, металлургическом коксе на 100%. С учетом значительного роста объемов производства конечной продукции НЛМК планирует реализацию ряда проектов с целью увеличения собственных мощностей по производству железорудного сырья, развития производства коксующегося угля, а также 100% самообеспеченности коксом и металлоломом до 2015 года.
В целях обеспечения потребностей НЛМК в основных видах сырья будут реализованы следующие проекты:
Ввод в строй первой очереди фабрики по производству окатышей на Стойленском ГОКе мощностью 3 млн тонн в 2011 году и увеличение до 6 млн тонн в 2014 году.
Сохранение производства железорудного концентрата ОАО “Стойленский ГОК” на уровне 11,4 млн тонн к 2015 году.
Строительство и пуск в 2011 году на месторождении Жерновское-1 шахты и фабрики обогащения коксующихся углей мощностью 3 млн тонн.
Увеличение производства кокса до 6,5 млн тонн за счет строительства коксовой батареи №6 в 2011 году при одновременном закрытии 4-х коксовых батарей на площадке НЛМК в Липецке.
Увеличение сбора металлолома на площадках НЛМК и Макси-Групп с 2,1 млн тонн в 2007 г. до 7,0 млн тонн в 2015 г.
6. Развитие производства на зарубежных площадках
Основной задачей развития зарубежных площадок НЛМК является увеличение объемов производства готового проката и рост доли продукции с высокой добавленной стоимостью.
На площадке Dansteel A/S планируется увеличение общего объема производства прокатной продукции до 600 тыс. тонн и увеличение объемов выпуска специальных марок толстого листа.
В рамках совместного предприятия НЛМК с Дюферко (Steel Invest and Finance (SIF)) планируется увеличение производства листового и сортового проката до 6,3 млн тонн в год2, а также увеличение доли продукции с высокой добавленной стоимостью в общем объеме производства до 57%. В частности, планируется осуществить следующие проекты:
Рост производства толстого листа на Clabecq (Бельгия) до 0,9 млн тонн к 2010 г. и внедрение технологии производства толстого листа с закалкой и отпуском (quenching and tempering)
Увеличение объемов производства стали на Carsid (Бельгия) до 2,1 млн тонн, строительство вакууматора и реконструкция УНРС
Ввод новой нагревательной печи на предприятии La Louviere (Бельгия) с увеличением производства плоского проката до 3,0 млн тонн
Реконструкция итальянского завода Verona Steel (Италия), выход на производственные мощности 0,6 млн тонн толстого листа и слитков для прессования (forging ingots)
Председатель Совета Директоров НЛМК Владимир Лисин так прокомментировал принятый план развития Компании:
«Стремительное развитие российской экономики стало мощным фактором роста внутреннего спроса на сталь. К 2015 году потребление стали в России возрастет на 60-65%. Мы ожидаем значительного увеличения потребления нашей продукции в строительстве, машиностроении, автомобильной промышленности, в инфраструктурных проектах и других металлоемких отраслях. Планы развития НЛМК направлены на удовлетворение растущего спроса на отечественном рынке. Мы намерены наращивать производство стали и выпуск качественной готовой продукции во всех регионах присутствия. С этой целью мы приняли решение значительно увеличить объем инвестиций в развитие мощностей НЛМК и утвердили ключевые параметры 3-го этапа Программы технического перевооружения до 2015 года. Программа направлена на укрепление первенства компании по эффективности производства и выход ее в лидеры среди производителей стали на российском рынке.
Компания также намерена развивать мощности по производству готового проката на наиболее емких зарубежных рынках. Реализация данной стратегии способствует укреплению лидерства НЛМК как глобальной стальной компании и росту производства высокорентабельных видов продукции. На это нацелена программа развития наших зарубежных активов».
1 Включая производство на площадках ОАО “НЛМК” (12,4 млн. тонн) и ОАО “Макси-групп” (3,9 млн. тонн).
2 Мощности по сортовому прокату SIF составляют ок. 0,5 млн. тонн/год.
В настоящее время НЛМК реализует 2-й этап Программы технического перевооружения, который планируется завершить в 2011 году. В результате в 2011 году производство стали на российских площадках группы увеличится до 16,3 млн тонн1, производство листового проката на основной площадке НЛМК возрастет до 5,5 млн тонн, производство сортового проката на мощностях Макси-Групп возрастет до 4,0 млн тонн. Объем инвестиций в реализацию 2-го этапа программы составит более 4,4 млрд. долларов в производственный комплекс НЛМК, включая дочерние компании, и около 1,8 млрд. долларов в развитие активов Макси-Групп.
Утвержденный решением Комитета по стратегическому планированию 3-й этап Программы технического перевооружения включает инвестиции на 2009-2015 гг. и определяет производственную стратегию Группы НЛМК до 2015 года. Новый этап Программы предусматривает рост производства стали НЛМК в России до 22 млн тонн, листового проката – до 6,9 млн тонн, сортового и трубного проката – до 5,9 млн тонн. Объем инвестиций в реализацию 3-го этапа Программы на производственной площадке НЛМК ожидается на уровне 4,1 млрд. долларов и около 2,0 млрд. долларов в развитие активов Макси-Групп.
Кроме того, Программой предусмотрено производство стали в объеме 3,1 млн тонн и производство листового проката в объеме 6,4 млн тонн на зарубежных площадках НЛМК.
Третий этап Программы технического перевооружения НЛМК предусматривает:
1. Увеличение объемов выплавки стали на российских площадках НЛМК до 22 млн тонн.
Выпуск стали в конвертерных цехах на площадке в Липецке составит 14,5 млн тонн до 2015 г.
Выпуск стали в электросталеплавильных цехах на площадке в Липецке составит 1,5 млн тонн до 2015 г. Для этого планируется сооружение на Новолипецком металлургическом комбинате литейно-прокатного комплекса, состоящего из электросталеплавильного цеха, линии разливки тонких слябов и стана горячей прокатки.
Выпуск стали в электросталеплавильных цехах на площадках Макси-Групп составит около 6,0 млн тонн в 2015 г.
2. Увеличение выпуска листового проката на российских площадках НЛМК до 6,9 млн тонн.
Выпуск горячекатаного проката на площадке в Липецке в 2012 году составит 6,9 млн тонн, в т.ч. 1,3 млн тонн на литейно-прокатном комплексе
Выпуск холоднокатаного проката и проката с покрытиями на площадке в Липецке возрастет до 4,2 млн тонн в год за счет строительства станов холодной прокатки, сооружения агрегатов непрерывного горячего оцинкования и ввода в действие агрегата полимерных покрытий.
Кроме того, до конца 2008 года НЛМК планирует принять решение о строительстве Тольяттинского электрометаллургического завода мощностью до 2 млн тонн листового горячекатаного проката в год.
3. Увеличение выпуска сортового и трубного проката на площадках Макси-Групп до 5,9 млн тонн.
Выпуск 1,4 млн тонн высокопрочной арматуры и катанки на производственной площадке в г. Нижние Серьги в 2008 году.
Ввод в эксплуатацию мощностей по производству 1,0 млн тонн катанки и арматуры на производственной площадке в г. Березовский в середине 2008 года.
Начало строительства в 2008 году первой очереди Калужского электрометаллургического завода с выходом на объем производства 1,2 млн тонн арматуры и фасонного профиля к 2011 году и до 2,0 млн тонн сортового проката к 2015 году.
До конца 2008 года НЛМК планирует принять решение о строительстве электросталеплавильного цеха и мощностей по производству бесшовных труб до 1,0-1,5 млн тонн в Сибирском регионе.
Кроме того, до конца 2008 года НЛМК планирует принять решение о строительстве Воронежского электрометаллургического завода мощностью до 2 млн тонн сортового проката в год.
4. Программа развития производства электротехнической стали
Общий объем производства трансформаторной стали на площадках НЛМК планируется на уровне не менее 400 тыс. тонн к 2015 г. При этом доля высокопроницаемой трансформаторной стали (ВПС) составит более 70%.
5. Программа обеспечения производства стали основными видами сырья
Сегодня НЛМК обеспечивает собственные потребности в железорудном сырье на 90%, металлургическом коксе на 100%. С учетом значительного роста объемов производства конечной продукции НЛМК планирует реализацию ряда проектов с целью увеличения собственных мощностей по производству железорудного сырья, развития производства коксующегося угля, а также 100% самообеспеченности коксом и металлоломом до 2015 года.
В целях обеспечения потребностей НЛМК в основных видах сырья будут реализованы следующие проекты:
Ввод в строй первой очереди фабрики по производству окатышей на Стойленском ГОКе мощностью 3 млн тонн в 2011 году и увеличение до 6 млн тонн в 2014 году.
Сохранение производства железорудного концентрата ОАО “Стойленский ГОК” на уровне 11,4 млн тонн к 2015 году.
Строительство и пуск в 2011 году на месторождении Жерновское-1 шахты и фабрики обогащения коксующихся углей мощностью 3 млн тонн.
Увеличение производства кокса до 6,5 млн тонн за счет строительства коксовой батареи №6 в 2011 году при одновременном закрытии 4-х коксовых батарей на площадке НЛМК в Липецке.
Увеличение сбора металлолома на площадках НЛМК и Макси-Групп с 2,1 млн тонн в 2007 г. до 7,0 млн тонн в 2015 г.
6. Развитие производства на зарубежных площадках
Основной задачей развития зарубежных площадок НЛМК является увеличение объемов производства готового проката и рост доли продукции с высокой добавленной стоимостью.
На площадке Dansteel A/S планируется увеличение общего объема производства прокатной продукции до 600 тыс. тонн и увеличение объемов выпуска специальных марок толстого листа.
В рамках совместного предприятия НЛМК с Дюферко (Steel Invest and Finance (SIF)) планируется увеличение производства листового и сортового проката до 6,3 млн тонн в год2, а также увеличение доли продукции с высокой добавленной стоимостью в общем объеме производства до 57%. В частности, планируется осуществить следующие проекты:
Рост производства толстого листа на Clabecq (Бельгия) до 0,9 млн тонн к 2010 г. и внедрение технологии производства толстого листа с закалкой и отпуском (quenching and tempering)
Увеличение объемов производства стали на Carsid (Бельгия) до 2,1 млн тонн, строительство вакууматора и реконструкция УНРС
Ввод новой нагревательной печи на предприятии La Louviere (Бельгия) с увеличением производства плоского проката до 3,0 млн тонн
Реконструкция итальянского завода Verona Steel (Италия), выход на производственные мощности 0,6 млн тонн толстого листа и слитков для прессования (forging ingots)
Председатель Совета Директоров НЛМК Владимир Лисин так прокомментировал принятый план развития Компании:
«Стремительное развитие российской экономики стало мощным фактором роста внутреннего спроса на сталь. К 2015 году потребление стали в России возрастет на 60-65%. Мы ожидаем значительного увеличения потребления нашей продукции в строительстве, машиностроении, автомобильной промышленности, в инфраструктурных проектах и других металлоемких отраслях. Планы развития НЛМК направлены на удовлетворение растущего спроса на отечественном рынке. Мы намерены наращивать производство стали и выпуск качественной готовой продукции во всех регионах присутствия. С этой целью мы приняли решение значительно увеличить объем инвестиций в развитие мощностей НЛМК и утвердили ключевые параметры 3-го этапа Программы технического перевооружения до 2015 года. Программа направлена на укрепление первенства компании по эффективности производства и выход ее в лидеры среди производителей стали на российском рынке.
Компания также намерена развивать мощности по производству готового проката на наиболее емких зарубежных рынках. Реализация данной стратегии способствует укреплению лидерства НЛМК как глобальной стальной компании и росту производства высокорентабельных видов продукции. На это нацелена программа развития наших зарубежных активов».
1 Включая производство на площадках ОАО “НЛМК” (12,4 млн. тонн) и ОАО “Макси-групп” (3,9 млн. тонн).
2 Мощности по сортовому прокату SIF составляют ок. 0,5 млн. тонн/год.
Подписка на обновления
Необходимо принять условия Политики обработки персональных данных